Le SentroPAT DA est le système NIR compact et dédié pour le monitoring non invasif du blending de poudres en pharmacie : spectromètre diode-array haute résolution, synchronisation 3D intelligente, batteries hotswap, intégration facile bin/blender, validation GmP-21CFR part11, optimisation et sécurisation du process blending du développement à l’industrialisation.

Points clés

  • NIR blending pharma : suivi homogénéité, point final par process data, pas de sampling

  • Diode-array 1100–1900 nm, résolution 10 nm, calibration transférable

  • Synchronisation automatique (3D sensor), montage 2”/4” sanitaire, design ultra-compact

  • Batterie hot-swap > 6 h, data buffered, WiFi/OPC/SiPAT/PharmaMV/21CFR part11

  • Validation IQ/OQ intégrée, conformité GmP, surfaces lisses et nettoyage facile

  • Intégration process simplifiée, support Sentronic, monitoring process temps réel

  • Réduction coûts, fiabilité et optimisation qualité

Main features

  • Lightweight, compact, easy to mount
  • GmP friendly with smooth surfaces
  • Accurate and reliable Diode Array NIR technology
  • Internal wavelength and intensity reference
  • Lowest cost of ownership
  • WiFi connected and battery powered
  • Embedded PC for instrument control and data buffering
  • Full GmP support for instrument and
  • Optional Interfaces to OPC, SiPAT, SynTQ or PharmaMV

Et plus...

Technical Data SentroPAT DA
Detector 512 pixel linear InGaAs array
Wavelength range 1100 – 1900nm
Spectral resolution (FWHM) approx. 10nm
Wavelength accuracy < 1nm
Wavelength reproducibility < 0.2nm
Photometric linearity Fulfilling USP <1856> and EP 2.2.40 requirements
Noise – High flux According to USP<1856> and E.P. 2.2.40
Noise – Low flux According to USP<1856> and E.P. 2.2.40
Light source 2 x 5W used redundantly for maintenance free operation for > 10 years
Data acquisition time < 1s (configurable)
Sampling interface Non contact, through sapphire window
Measurement spot size 12 mm
Power supply replaceable Li-Ion battery, > 6 hours operation
External power supply for lab operation and recharging
Enclosure IP65 / NEMA4, cGMP conform, Aluminum anodized
Dimensions 170 x 105 x 60mm (W x D x H)
Height: add 36mm for flange
Weight 2.2Kg
Measurement trigger software controlled by 3 axis accelerometer
Communications WiFi (802.11 a/g/n)
Software SentroSuite GmP, optional interfaces to SiPAT and SynTQ
Validation Software integrated validation routines according USP<1856>, EP2.2.40
Service port Service Connections for HDMI monitor and USB for computer peripherals
Mounting 4″ or 2″ sanitary flange